NISSAN FIARLADY Z
HIGH LIFT CAMSHAFT
This camshaft was ground from forged material which was designed for VQ37VHR engine. The form (profile) will become the best logically because cam design has flexibility by grinding from material.
Regular Camshaft Series
Exhaust 68(272)-11.0 --- MSRP: JPY63,800yen
Exhaust 72(288)-11.0 --- MSRP: JPY74,800yen
FORGED ALUMINUM PISTON KIT
This piston kit will be able to install stock cylinder without boring and honing machining, because the bore diameter is same as stock piston. This piston was made from the excellent forged material same as the piston so far. So, it will be able to say as the high-end piston which can show durability and performance more than enough for the high spec engine of VR38DETT.
98.0mm(CR=12.7) MSRP: JPY264,000yen
98.0mm(CR=11.1) MSRP: JPY264,000yen
- Cylinder liner for oversized piston is necessary.
- Dynamic balancing of crankshaft is necessary.
CYLINDER LINER KIT
Dedicated cylinder liners are prepared for engines that can not be subjected to boring processing which was subjected to a film treatment such as plating and plasma spraying on the cylinder surface. Please use them for assembly of oversized piston, upward displacement or block regeneration.
CAST IRON 95.5-98.0mm
Installing liner MSRP: JPY209,000yen
BIG THROTTLE BODY
This product expanded 2mm diameter which was considered balance between performance and durability. And, the throttle body inside wall was regrind. Moreover, the butterfly spindle was made thin for reducing inhalation resistance. We will machine your throttle body you sent.
Machining your throttle body
This radiator cap uprates the pressure of release valve. That result, boiling point of coolant is raised by increases pressure of piping. By this, it raises the cooling efficiency of the radiator, and will repress overheat.
Type S (1.3kg/cm²)
Type N (1.3kg/cm²)
SIDE SILLS FOAMING URETHANE KIT
This new reinforcement method makes high rigidity feel simply, so that it reverses old common sense. The car which performed urethane body reinforcement can feel the difference, when it get in and departs, you feel a motion of a car. The car which has constructed the roll cage etc. is still more effective. Although there is a difference in the ratio of an effect also by the new car or the old vehicle, rigidity is raised certainly.
UNIVERSAL REAR SEAT BOARD
After a rear seat is removed, this product is used as a bulkhead. The Universal Rear Seat Board will make a stylish cockpit without weight because it was made by the carbon. Cut these boards along the form of your car, and use.
- Shape it to the form of your car
UNIVERSAL FRONT DIFFUSER
An air pocket in central part amplifies incoming air from bottom of front bumper temporarily and the compressed air quickens speed, and it is drained behind your vehicle. Strakes before front wheels reduce turbulence by the tires, and the air deflects to center of vehicle. The quickened air makes down force occur through bottom of vehicle. Moreover by the type of vehicle, this diffuser has effect which lowers water and intake temperature because it pulls out heat from engine room.
FRP MSRP: JPY57,200yen
CARBON MSRP: JPY107,800yen
JUN & Cuircuit Concept Z34
- Car Name
- JUN & Curcuit Concept Z34
- NISSAN 370Z
- Engine Type
- MAX Power
- MAX Torque
- Bore x Stroke
- Engine Displacement
- JUN Forged Aluminum 98mm (Prototype)
- Connecting Rod
- JUN I-Beam (Prototype)
- Crank shaft
- JUN Prototype 288 (EXH)
- Head gasket
- JUN Big Throttle Body
- Exhaust Manifold
- Circuit Concept
- Circuit Concept
- Oil Cooler
- Circuit Concept Oil Cooler Kit
- EXEDY Carbon D Twin
- Circuit Concept Suspension Kit
- Carbon Composite Strut Bar
- Tire name/Size
- ADVAN NEOVA AD08 F:265/35R19 R:295/35R19
- Wheel name/Size
- ADVAN Racing RZ DF F19x10.0J+35 R:19x10.0J+15
- AP Racing Brake Kit
- Circuit Concept Front Bumper, Rear Diffuser, Dry-Carbin Bonnet Hood