• This product was discontinued.

This lip-spoiler has the form low and projected to the front. It leaves a normal good design and has a good figure. It exchanges to normal spoiler so that easily exchanging and economical.

• This product was discontinued.

This bumper is made air space at the front bumper bigger than stock bumper. It improves the cooling efficiency of the intercooler and radiator. It is considering for after parts (oil cooler,brake duct). It has the duct of both sides big, and adds an air duct to both sides. It contributes to the stability in high-speed-running because optimal down force is gotten by large-size rip spoiler.

• In Japan, along with the amendment of the safety standards of road transport vehicles, the turn indicator included in this product became non-compliant. Please be forewarned.
• In the photograph, we made two holes on the top of intercooler. Holes are not open in this product.

• This product was discontinued.

A runnig-wind is discharged efficiently and engine room is cooled efficiently because this bonnet has two air duct at the central of front, and it has two air duct at the right-left part on rear part. This bonnet is made from FRP material so it is very light. It can prevent vibration of bonnet at the time of a high-speed-running because it is the three hold type which uses both two bonnet pin and normal holder.

• A hood top mall is as one with a bonnet hood.

• This product was discontinued.

This grille is installed for the purpose of cooling the engine room effectively. A runnig-wind enters into the engine room so that engine room is cooled. It becomes individual and sporty countenance by change of a front grille.

• This product was discontinued.

A beautiful line is made in side face because it is designed with JUN Front Bumper Spoiler and JUN Rear Mud Guards together. It is design with volume and considered running-ability. It has the newly added air duct which can use as air duct for rear brake cooling.

• This product was discontinued.

It is a design with large-sized wings and small spoiler is attached on trunk. The running stabilized at the time of a high-speed-running is realized. It does not have fear of caring about normal attachment hole because it has the design which covers normal attachment hole.

• Waterproofing is necessary in the trunk hood.

• This product was discontinued.

This mud-guard is divided two. It has sporty rear view because it is designed with JUN Front Bumper Spoiler and JUN Side Step together. It makes a contribution to rectification effect.