TOYOTA SUPRA - JZA80

PRODUCT LIST

Product Material PART # MSRP(yen) REMARKS
FRONT BUMPER SPOILERFRP8002W-T002 JPY105,840For the early model
FRONT BUMPER SPOILERFRP8002W-T001 JPY105,840For the latest model
AERO BONNET HOODFRP8006W-T001 discontinuedBonnet pins are contained.
REAR SPOILER (GT-WING)FRP8004M-T001 discontinued

FRONT BUMPER SPOILER

This bumper is made air space at the front bumper bigger than normal. It improves the cooling efficiency of the intercooler and radiator. It is considering for after parts (oil cooler,brake duct). It has the duct of both sides big. It contributes to the stability in high-speed-running because optimal down force is gotten by large-size rip spoiler. It can be dressed up,without spoiling a normal design of 80-SUPRA because It is designed to fit curve of SUPRA.

SPECIFICATIONS
Vehicle TOYOTA SUPRA JZA80
Material FRP(White gel coat)
Weight 4.9kg
Width 1800mm
Height 510mm
Front Duct260mm x 740mm
Brake DuctTwo places
Paint No
Accessoriesside marker x2
  • * The stock blinker lenses of the latest model are necessary for the early model.
  • * Weight and dimensions are the reference values. They may be different from the things.
  • * Entrust the professional shop whose reliability is high with the installation of this product.

AERO BONNET HOOD

A runnig-wind is discharged efficiently and engine room is cooled efficiently because this bonnet has two air duct at the central of front, and it has two air duct at the right-left part on rear part. This bonnet is made from FRP material so it is very light. It can prevent vibration of bonnet at the time of a high-speed-running because it is the three hold type which uses both two bonnet pin and normal holder.

SPECIFICATIONS
Vehicle TOYOTA SUPRA JZA80
Material FRP(Black gel coat)
Weight -.-kg
Width ---mm
Depth ---mm
Paint No
AccessoriesBonnet hood pins
  • * Weight and dimensions are the reference values. They may be different from the things.
  • * Entrust the professional shop whose reliability is high with the installation of this product.
  • * Be sure to install hood pins for the safety.
  • * The bonnet pin holes are not opened. Make holes in the position where your car fit it.

REAR SPOILER (GT-WING)

* This product was discontinued.

The rod located in the wing stay rear realized angle adjustment of the wing and the wing itself has a variable mechanism in rear wings so it can change setting according to situation of running. The wing uses FRP material and the stay part uses aluminum material. Stay is made from aluminum material so it is very light and strong. It is expressed the beauty of aluminum material.

SPECIFICATIONS
Vehicle HONDA PRELUDE BB1/BB4
WING PART
Material FRP(White gel coat)
Weight 3.3kg
Width 1400mm
Depth 280mm
Paint No
STAY PART
Material Aluminum
Weight 2.0kg
Height 120mm
Paint No
AccessoriesNo
Note Body processing required.
  • * Weight and dimensions are the reference values. They may be different from the things.
  • * Entrust the professional shop whose reliability is high with the installation of this product.