SUBARU BRZ/TOYOTA GR86 - ZD8 / ZN8

PRODUCT LIST

Product Material PART # MSRP(yen) REMARKS
AERO BONNET HOOD GR86/BRZCARBON8006M-F002JPY180,000 
FRONT DIFFUSER TOYOTA GR86CARBON8014M-T003JPY115,000 
FRONT DIFFUSER SUBARU BRZCARBON8014M-F003JPY115,000 
SIDE DIFFUSERS GR86/BRZCARBON8008M-F002JPY130,000 
REAR SIDE DIFFUSER GR86/BRZCARBON8014M-F002JPY70,000 
AERO MIRROR GR86/BRZCARBON8009M-F002JPY92,000 
  • The carbon products are painted a clear coat.

CARBON BONNET HOOD

BONNET HOOD

  • BONNET HOOD
  • BONNET HOOD
  • BONNET HOOD
  • Please note that the bonnet pins and the installation process are not included in the delivered product.

This product is made of all carbon in stock shape. The outer and even the inner panels are made of CFRP, making it extremely lightweight, more than 3kg lighter than the factory hood (approx. 8.6kg).

SPECIFICATIONS
Vehicle TOYOTA GR86 / ZN8
SUBARU BRZ / ZD8
Material WET CARBON (twill)
Weight 5.5kg
Width ---mm
Depth ---mm
Paint Clear coat
AccessoriesMounting Screws (M6 4pcs)
  • There will be some distortion of the surface due to the emphasis on weight reduction.
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.
  • Bonnet pins must be prepared separately. Be sure to install the hood pin to prevent it from falling off.

FRONT DIFFUSER

FRONT DIFFUSER

  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER
  • FRONT DIFFUSER

This product is installed under the factory front bumper. The lip shape protrudes from the front of the bumper to increase the flat ground clearance and provide more downforce. Also, the canards effect improves the ground contact of the front tires in corners.

The ground clearance is 50mm at the front and 25mm at the rear ends of both wings, each lower than the bottom of the factory bumper. As a result, the underside of the diffuser is brought close to parallel to the ground surface. The height of the wingtip plates is 95mm.

SPECIFICATIONS
Vehicle TOYOTA GR86 / ZN8
SUBARU BRZ / ZD8
Material WET CARBON (twill)
Weight -.-kg
Width ---mm
Depth ---mm
Paint Clear coat
AccessoriesStays and screws
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.
  • They are same form of lip spoiler between the each vehicles.

SIDE DIFFUSERS

SIDE DIFFUSER

  • SIDE DIFFUSER
  • SIDE DIFFUSER
  • SIDE DIFFUSER
  • SIDE DIFFUSER

The shape of the duct protrudes from the vehicle body, speeding up the velocity of air flowing along the sides of the vehicle and efficiently channeling it to the rear of the vehicle. The ducts are installed as an extension of the fender slits, allowing air to escape from the wheel house and under the floor.

Ground clearance is 35mm lower than the bottom of the factory side steps. The height of the rear wing plate is 95mm.

SPECIFICATIONS
Vehicle TOYOTA GR86 / ZN8
SUBARU BRZ / ZD8
Material WET CARBON (twill)
Weight -.-kg
Width ---mm
Depth ---mm
Paint Clear coat
AccessoriesScrews
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.

REAR SIDE DIFFUSER

REAR DIFFUSER

  • REAR DIFFUSER
  • REAR DIFFUSER
  • REAR DIFFUSER
  • REAR DIFFUSER

This diffuser is installed under both sides of the stock rear bumper. This diffuser suppresses turbulence behind the tires, and the rectification plates on the left and right sides allow air to flow smoothly backward.

Ground clearance is 25mm lower than the bottom of the factory side steps.

SPECIFICATIONS
Vehicle TOYOTA GR86 / ZN8
SUBARU BRZ / ZD8
Material WET CARBON (twill)
Weight -.-kg
Width ---mm
Depth ---mm
Paint Clear coat
AccessoriesScrews
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.

AERO MIRROR

AERO MIRROR

  • AERO MIRROR
  • AERO MIRROR
  • AERO MIRROR
  • AERO MIRROR
  • The door mirror indicator (blind spot monitor) is not built into the mirror. For car models compatible with this function, the sensor failure warning can be suppressed by connecting the included LED to the existing wiring. It can also function as an equivalent warning light by installing the LED section as appropriate.

This product installs under each side of the stock rear bumper.

SPECIFICATIONS
Vehicle TOYOTA GR86 / ZN8
SUBARU BRZ / ZD8
Material WET CARBON (twill)
Weight -.-kg
Paint Clear coat
AccessoriesLED for BSD/RCTA
  • Although it meets the standards as a safety related part, it may be restricted to use on public roads in Japan. For details, please contact the Land Transport Bureau under jurisdiction.
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.