HONDA INTEGRA Type-R - DC5

PRODUCT LIST

Product Material PART # MSRP(yen) REMARKS
FRONT BUMPER SPOILER FRP8002W-H001JPY84,000For the early model
AERO BONNET HOOD FRP8006W-H004discontinuedFor the early model/Bonnet pins are contained.
AERO BONNET HOODCARBON8006W-H005discontinuedFor the early model
SIDE STEPS FRP8008W-H001JPY54,000 
REAR UNDER SPOILER FRP8013W-H001JPY52,000For the early model

FRONT BUMPER SPOILER

JUN Front Bumper makes the bumper opening larger than the factory one. The exposing air led to a radiator by this increases, and the positive cooling effect is acquired. Moreover, the form of the bumper side in consideration of the down force contributes to the stability at the time of a high-speed run. The side duct is enlarged so that it can respond to an oil cooler, a brake duct, etc.

SPECIFICATIONS
Vehicle HONDA INTEGRA Type-R DC5 for the early model
Material FRP(Black gel coat)
Weight -.-kg
Width ---mm
Height ---mm
Front Duct---mm x ---mm
Paint No
Accessories No
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.

AERO BONNET HOOD

  • This product was discontinued.

Two large size outlet ducts are placed at right and left in the central part, and the heat air of a radiator and the heat air front part of engine room is discharged. The outlet duct placed in the rear center discharges the heat air of exhaust and the engine rear positively. Since exhaust manifold is placeed at the engine rear, as for these vehicles, heat air tends to collect in an engine room. An outlet duct is required in order to protect a steering gear box and other apparatus from a heat trouble.

SPECIFICATIONS
Vehicle HONDA INTEGRA Type-R DC5 for the early model
Material FRP(Black gel coat)
Weight 6.0kg
Width 1440mm
Depth 1150mm
Paint No
AccessoriesBonnet hood pins
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.
  • Be sure to install hood pins for the safety.
  • The bonnet pin holes are not opened. Make holes in the position where your car fit it.

SIDE STEPS

JUN Side Step part is designed low and widely. This form can expect the rectification effect from the side of a front bumper to a rear tire. Since all of our Front Bumper Spoiler and Rear Under Spoiler are designed by the common concept, we recommend equipping together with these.

SPECIFICATIONS
Vehicle HONDA INTEGRA Type-R DC5
Material FRP(Black gel coat)
Weight -.-kg
Width ---mm
Height ---mm
Paint No
AccessoriesNo
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.

REAR UNDER SOPILER

JUN Rear Under Spoiler is made the design with volume in order to direct a powerful rear view. Since all of our Front Bumper Spoiler and Side Step are designed by the common concept, we recommend equipping together with these.

SPECIFICATIONS
Vehicle HONDA INTEGRA Type-R DC5 for the early model
Material FRP(Black gel coat)
Weight -.-kg
Width ---mm
Height ---mm
Depth ---mm
Paint No
AccessoriesNo
  • Weight and dimensions are the reference values. They may be different from the things.
  • Entrust the professional shop whose reliability is high with the installation of this product.
  • We cannot accept to return the purchasing products after painting, processing or fitting.