CYLINDER LINER KIT

Dedicated cylinder liners are prepared for engines that can not be subjected to boring processing which was subjected to a film treatment such as plating and plasma spraying on the cylinder surface. Please use them for assembly of oversized piston, upward displacement or block regeneration.
In cylinders with insufficient strength, distortion may occur in the cylinder when raising the power. If the cylinder is distorted, the piston clearance will be out of order, so the engine will cause troubles such as abnormal discharge of blowby gas and piston scuffing. This cylinder liner kit is also useful to solve these problems.
We can also produce models not in the lineup, please feel free to contact us.
  • VR38DETT with CAST IRON SLEEVE
  • VR38DETT with ALUMINUM SLEEVE

Example of installation of cylinder liners(VR38DETT)

  • CYLINDER LINER KIT
  • CYLINDER LINER KIT
  • CYLINDER LINER KIT

JUN CYLINDER LINER KIT
Engine Application Bore Material Type Part # MSRP(yen) Remarks
NISSAN
VR38DETT 95.5-96.0mm Cast Iron DRY 1023M-N004JPY180,000 
96.0mm Aluminum
(Nikasil plating)
DRY 1023M-N005JPY400,000Only for 96.0mm bore piston
WET 1023M-N006JPY400,000
98.0mm DRY 1023M-N007JPY400,000Only for 98.0mm bore piston
WET 1023M-N008JPY400,000
VQ37VHR 95.5-98.0mm Cast Iron DRY 1023M-N009JPY180,000 
SR20DE(T) 87.0mm Cast Iron DRY 1023M-N002JPY42,000Only for 87.0mm bore piston
  • ‡1 Aluminum liner for VR38 is manufactured according to JUN Forged Aluminum Piston R-Series. If it is combined with other pistons, it may not be a proper piston clearance. Also, since the inner surface of the cylinder is coated with coating film, additional work can not be performed basically.