HIGH LIFT CAMSHAFT - NISSAN VR38DETT
Bolt-on Camshaft Series
This camshaft already adjusted the valve timing. It is bolt-on camshaft which can use with stock valve spring and computer.
Regular Camshaft Series
This series can be used in wide stages from the street spec to the high power engine.
| Spec (unit: mm) | PART # | MSRP(yen) | REMARKS | |||
|---|---|---|---|---|---|---|
| Duration | Lift | VC | ||||
| Bolt-on Camshaft Series | ||||||
| 64 (256) | 10.3 | 0.30 | IN | 1004M-N410 | JPY44,100 | Can use with stock ECU |
| 0.33 | EX | 1004M-N510 | JPY44,100 | |||
| 66 (264) | 10.3 | 0.30 | IN | 1004M-N411 | JPY44,100 | Can use with stock ECU |
| 0.33 | EX | 1004M-N511 | JPY44,100 | |||
| Regular Camshaft Series | ||||||
| 68 (272) | 10.8 | 0.30 | IN | 1004M-N412 | JPY50,400 | [REQUIRED]Reinforced valve spring |
| 0.33 | EX | 1004M-N512 | JPY50,400 | |||
VC=Valve Clearance (cool conditions)
- * As for this product, two camshafts of INT or EXH are contained.
- * The amout of lifts shows the cam lift.
- * The camshaft which is 10.4mm or higher lift of the profile cannot use together with stock valve spring. We prepare the Valve Spring Set for high lift camshaft for VR38DETT.
