HIGH LIFT CAMSHAFT

  • OUTLINE
  • POINTS
  • LINE-UP
NISSAN
TOYOTA
HONDA
MITSUBISHI
SUBARU
MAZDA
  • B6ZE
  •  
  •  
  •  
  •  
  •  
  •  
SUZUKI

DETAIL

NISSAN VQ35DE/VQ35HR

  • HIGH LIFT CAMSHAFT
High Lift Camshafts for VQ35DE and VQ35HR
Spec (unit: mm)   PART # MSRP(yen) REMARKS
Duration Lift
VQ35DE Early model (to Sep. 2005)
64 (256) 10.3 IN 1004M-N461 JPY45,360  
EX 1004M-N561 JPY45,360
66 (264) 10.8 IN 1004M-N462 JPY45,360  
EX 1004M-N562 JPY45,360
68 (272) 10.8 IN 1004M-N463 JPY51,840  
EX 1004M-N563 JPY51,840
68 (272) 11.3 IN 1004M-N464 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N564 JPY51,840
70 (280) 11.3 IN 1004M-N465 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N565 JPY51,840
VQ35DE Early model (to Jan. 2007)
64 (256) 10.3 IN 1004M-N466 JPY45,360  
EX 1004M-N566 JPY45,360
66 (264) 10.8 IN 1004M-N467 JPY45,360  
EX 1004M-N567 JPY45,360
68 (272) 10.8 IN 1004M-N468 JPY51,840  
EX 1004M-N568 JPY51,840
68 (272) 11.3 IN 1004M-N469 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N569 JPY51,840
70 (280) 11.3 IN 1004M-N470 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N570 JPY51,840
VQ35HR
64 (256) 10.3 IN 1004M-N471 JPY45,360  
EX 1004M-N571 JPY45,360
66 (264) 10.8 IN 1004M-N472 JPY45,360  
EX 1004M-N572 JPY45,360
68 (272) 10.8 IN 1004M-N473 JPY51,840  
EX 1004M-N573 JPY51,840
68 (272) 11.3 IN 1004M-N474 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N574 JPY51,840
70 (280) 11.3 IN 1004M-N475 JPY51,840 [REQUIRED]Reinforced valve spring
EX 1004M-N575 JPY51,840
  • As for this product, two camshafts of INT or EXH are contained.
  • The height of lift shows the valve lift.
  • The camshaft which is 11.0mm or higher lift of the profile maybe interfere with valves and a piston. In addition, the valves may interfere with a piston depending on the state of the engine even if a valve lift is less than 11.0mm. Check the clearance when you install. Require the valve recess machining if the valves interfere with a piston.
  • The camshaft which is 11.0mm or higher lift of the profile needs to use uprated valve springs. You need to prepare application valve spring separately.